Makita LC1230 Technical Information page 7

Mounting of lever rod 10
1. Install rubber pin 4 on the lever holder as for as it will go.
2. Fastening torque for hex nut M10-17 must be 450kgfcm with torque wrench 1R223,
ratchet head 1R224 and 17mm1. Adjust box wrench.
3. Install the lever rod 10 in the area illustrated below.
holder for
rubber pin 4
lever holder
Adjusting for LC1230 with safety lock system
1. Adjust with hex bolt M6x16 so that the lock lever can return to the lock point from
the every working position smoothly.
2. Fastening torque for hex socket head bolt must be 80kgfcm.
rod 12
lock plate
stopper plate
hex socket head bolt
25
20
lever rod
lock lever
hex socket head bolt
compession spring