Overcharging shortens the battery service life. screw length. 3. Charge the battery cartridge with room For Models DFR540, DFR550 temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. Number indicated on the label Screw length 4.
OPERATION Switch action (Fig. 5) CAUTION: Driving operation (Fig. 15) • Before inserting the battery cartridge into the tool, Switch on the tool by pulling the switch trigger. Hold the always check to see that the switch trigger actuates tool squarely and firmly up against the driving surface. A properly and returns to the “OFF”...
Designation of Machine: Cordless Auto Feed Screwdriver • These accessories or attachments are recommended Model No./ Type: DFR540, DFR550, DFR750 for use with your Makita tool specified in this manual. are of series production and The use of any other accessories or attachments might Conforms to the following European Directives: present a risk of injury to persons.