Download Print this page

Honda 08E91-E54-100 Installation Instructions Manual page 4

Remote control engine starter unit kit
Hide thumbs Also See for 08E91-E54-100:

Advertisement

9.
Using a plastic trim tool, open the lid of the left A-
pillar trim.
LEFT
A-PILLAR TRIM
LEFT
A-PILLAR TRIM
DOOR OPENING
SEAL
CLIP
(Pull away.)
10. Remove the bolt from the left A-pillar trim.
11. Pull away the door opening seal and remove the left
A-pillar trim.
12. Pull away the door opening seal and remove the left
side dashboard cover.
7 RETAINING
TABS
LEFT SIDE
DASHBOARD
COVER
4 of 20
2 RETAINING
LID
TABS
BOLT
792203AE
DOOR OPENING
SEAL
(Pull away.)
792403CE
13. Shift the select knob to "D" position by pressing down
on the shift lock stopper with the ignition key.
Remove the left side center panel.
LEFT SIDE
CENTER
PANEL
IGNITION KEY
14. Remove the driver's dashboard lower cover.
Remove the A/C sensor.
12 CLIPS
SELF-TAPPING
SCREW
AII 51572 (1405)
VEHICLE
CONNECTOR
VEHICLE
CONNECTOR
SELECT
(If equipped)
KNOB
A/C SENSOR
VEHICLE
CONNECTOR
DRIVER'S
DASHBOARD
LOWER COVER
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
8 CLIPS
792808AE
2 RETAINING
TABS
A/C SENSOR
792205CE

Advertisement

loading