Download Print this page

Honda 08E91-E54-100 Installation Instructions Manual page 19

Remote control engine starter unit kit
Hide thumbs Also See for 08E91-E54-100:

Advertisement

Check the operation of the Remote Control Engine Starter
Operating Conditions
• The hood is closed
• The shift lever is in park
• Turn the ignition switch off and the key is outside the vehicle
• All doors and tailgate closed and locked
Inspection
1.
Press the engine/command button on the transmitter and release, within 2 seconds, press the lock/start button on
the transmitter.
The engine should start if all operating conditions are met.
Does the engine start?
Yes - Operation is normal.
No:
• Make sure all "Operating Conditions" are met.
• Check the engine starter harness connections.
• Connect the HDS/MVCI and check for an indicated failure.
(Refer to the appropriate Service Manual for details.)
2.
Press the engine/command button on the transmitter
and release, within 2 seconds, press the unlock/stop
button. The engine should stop.
Does the engine stop?
Yes - Operation is normal.
No - Check the engine starter harness connections.
3.
After the engine has stopped, start the engine again,
and check that the engine stops after each of the
following conditions:
NOTE: After each test the ignition key must be cycled, or the
driver's door must be opened and closed.
Move the shift lever out of the P position.
Unlock or open the doors or the tailgate.
Open the hood.
Insert the key in the ignition.
Press on the brake pedal.
Does the engine stop after each of these tests?
Yes - Operation is normal.
No - Check the engine starter harness connections.
4.
Check that the power windows and the moonroof do not function, and the shift lever does not move to any position
when the engine is started with the transmitter.
5.
Start the engine again, press the engine/command button on the transmitter two times, and check the vehicle
condition on the display.
6.
Check the operation of the transmitter when the vehicle is 120 m (400 ft.) away and in direct sight.
7.
Press the unlock/stop button on the transmitter and verify that the doors unlock. Press the lock/start button, and
verify that the doors lock.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
ENGINE/
COMMAND
BUTTON
UNLOCK/
STOP
BUTTON
AII 51572 (1405)
ENGINE START
OPERATION
LOCK/
START
BUTTON
RECEPTION
INDICATOR
CHECKING
INDICATOR
Blinking
ENGINE
RUNNING
INDICATOR
REMAINING
IDLING TIME
QB62902AB
19 of 20

Advertisement

loading