Advertisement
9.
Input the PCM-code, then click the check button.
NOTE: To ensure security, the PCM-code
(password) is changed everyday, so it is impossible
to register the remote control engine starter if the
dates of the PCM-code acquisition and registration
are different. The date of the HDS/MVCI tester
should also be the same.
Input the PCM-Code.
10. The following message will display: The registration
of the Remote Control Engine Starter Unit has
been completed. Turn the ignition switch off.
18 of 20
CHECK BUTTON
QB32107BH
"The registration of the
Remote Control Engine
Starter Unit has been
completed."
QB32108CH
AII 51572 (1405)
11. The following message will display: Check that
engine can be started by the Transmitter. Click
the check button.
"Check that engine can be
started by the Transmitter."
12. Perform the "Check the operation of the Remote
Control Engine Starter" on page 19, then disconnect
the HDS/MVCI.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
CHECK BUTTON
QB32109CH
Advertisement
