Technical Data - Makita dcg 230-d Operating Instructions Manual

4 Technical data

Right of technical changes reserved.
Power tool
Rated current / power input
en
Rated frequency
Rated speed
Cutting discs
Dimensions (L x H x W) without
hood
Weight in accordance with EPTA
procedure 01/2003
Information about the power tool and its applications
Drive spindle thread (arbor size)
Spindle length
Protection class as per EN / IEC
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise information (as perEN 60745‑1):
Typical A-weighted sound power level, DCG 230
Typical A-weighted emission sound pressure level,
DCG 230
Typical A-weighted sound power level, DAG 230
Typical A-weighted emission sound pressure level,
DAG 230
Uncertainty for the given sound level
Vibration information in accordance with EN 60745‑1
Triaxial vibration values (vibration vector sums) for the
DCG 230‑D
Surface grinding with the vibration absorbing side
handle, a
h,AG
Uncertainty (K)
Triaxial vibration values (vibration vector sums) for the
DAG 230‑D
Surface grinding with the vibration absorbing side
handle, a
h,AG
20
DCG 230‑D
Rated voltage 230 V:
12.0 A / 2,600 W
(CH 2200 W)
Rated voltage 110 V: 21.2 A /
2,200 W
Rated voltage 127 V: 15 A
50...60 Hz
6,500/min
Ø 230
525 mm x 138 mm x 111 mm
5.4 kg
M 14
25 mm
Protection class II (double insulated)
101 dB (A)
90 dB (A)
101 dB (A)
90 dB (A)
3 dB (A)
measured in accordance with EN 60745‑2‑3
5.0 m/s²
1.5 m/s²
measured in accordance with EN 60745‑2‑3
5.0 m/s²
DAG 230‑D
Rated voltage 230 V: 10.0 A /
2,200 W
Rated voltage 110 V: 19.4 A /
2,000 W
50...60 Hz
6,500/min
Ø 230
510 mm x 138 mm x 111 mm
4.6 kg