Description - Makita dcg 230-d Operating Instructions Manual

Obligation signs
Wear eye Wear a hard
protection hat
Wear
breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Hertz Watts
Revolutions Revolutions
per minute per minute

2 Description

2.1 Use of the product as directed
The power tool is an electrically-powered angle grinder for professional use in the construction industry. The power
tool is designed for cutting, grinding and brushing metal or mineral materials (concrete, stone, etc.) without use of
water.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Working with metals: Cutting, rough grinding, fine grinding, brushing
Working with mineral materials: Cutting, slitting and grinding.
Use only grinding discs, cutting discs and other accessories of max. 230 mm diameter that are approved for use at a
speed of at least 6500 /min.
For this application, use only synthetic resin-bonded fiber-reinforced abrasive cutting discs approved for use at a
peripheral speed of at least 80 m/sec.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Nationally applicable industrial safety regulations must be observed.
Modification of the power tool or tampering with its parts is not permissible.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Wear ear Wear
protection protective
gloves
Volts Amps
Alternating Rated speed
current
Diameter Double
insulated
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
en
17