REMOVING THE FRONT WHEEL
1.
Place the vehicle on a flat surface.
WARNING
Support the vehicle safely to avoid
there is a risk of falling.
2.
Survey:
• Front wheel
NOTE:
Place the vehicle on a suitable support,
so that the front wheel is lifted.
3.
Remove:
•
Front Wheel
• Speed Sensor Unit
• Spacer
NOTE:
Do not press the brake lever when removing
the front wheel.
DISASSEMBLY OF THE FRONT WHEEL
1.
Remove:
• Oil Seal
• Wheel Bearings
a.
Clean the outside of the wheel hub
front.
b.
Remove the oil seal "1" with a
flathead screwdriver.
NOTE:
To avoid damaging the wheel, place a cloth "2"
between the screwdriver and the surface of the wheel.
c. Remove the wheel bearings with a
bearing puller.
FRONT WHEEL
VERIFICATION
FRONT WHEEL
1. Check:
The ruedaEje of
Roll the wheel axle on a
flat surface.
Replace warping.
WARNING
Do not attempt to straighten a wheel axle.
2. Check:
Rim
delanteraRueda
Damage / wear Replace.
Refer to "CHECKING
TIRES "on page 3-19
Refer to "CHECKING
WHEEL "on page 3-20
3. Measure:
Radial deviation of the wheel "1"
Lateral deviation of the wheel "2"
Outside the specified limits Replace.
Limiting radial deflection of the wheel
1.0 mm
Limit lateral deflection of the wheel
0.5 mm
4-8