REMOVING THE ROCKER
1.
I placed the vehicle on a flat surface
WARNING
Support the vehicle with safety to
there is no risk of falling.
NOTE:
Support the vehicle safely to avoid
there is a risk of falling.
2.
Measure:
•
Swingarm side play.
a.
Measure torque the axle nut
pivot.
Pivot axle nut
60 Nm (6.0 m · kg, 43 ft · lb)
T.
R.
b.
Measure the rocker side "a"
moving the swing from side to side.
c.
If you look at the swingarm side play,
check the spacers, bearings, and
overall.
VERIFICATION OF OVERHEAD
1.
Check:
•
Tilt
Curves / damage / wear Replace.
2.
Check:
•
Pivot axis
Rotating the pivot shaft in a flat surface.
Replace curves.
WARNING
Do not attempt to straighten the axis of the pivot.
3.
Wash:
•
Pivot axis
•
Dust
•
Spacers
•
Bearings
Solvent for cleaning
recommended
Kerosene
4.
Check:
•
Dust
•
Spacers
•
Oil Seals
Damage / wear Replace.
•
Bearings
Damage / pitting Replace
TILT ASSEMBLY
1.
Lubricate:
•
Bearings
•
Spacers
•
Dust
•
Pivot axis
Recommended lubricant
Based grease lithium soap
2.
Assemble:
•
Bearings "1"
Mounting depth "a"
0.5-1.5 mm
4-51
SWING