Show Snmp Engineid; Create Snmp Group - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s n m p e n g i n e I D 1 0 2 3 4 5 7 8 9 0
C o m m a n d : c o n f i g s n m p e n g i n e I D 1 0 2 3 4 5 7 8 9 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

6-12 show snmp engineID

Purpose
Used to display the identification of the SNMP engine on the switch.
Format
show snmp engineID
Description
The show snmp engineID command displays the identification of the SNMP engine on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s n m p e n g i n e I D
C o m m a n d : s h o w s n m p e n g i n e I D
S N M P E n g i n e I D : 1 0 2 3 4 5 7 8 9 0
D G S - 3 2 0 0 - 1 0 : 4 #

6-13 create snmp group

Purpose
Used to create a new SNMP group, or a table that maps SNMP users to SNMP views
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]]{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name
32>}
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
75