Config Snmp System_Contact; Enable Rmon - D-Link DGS-3200 SERIES Cli Manual

7-7 config snmp system_contact

Purpose
Used to enter the name of a contact person who is responsible for the switch.
Format
config snmp system_contact {<sw_contact>}
Description
The config snmp system_contact command is used to enter the name and/or other information to
identify a contact person who is responsible for the switch. A maximum of 255 character can be used.
Parameters
Parameters
sw_contact
Restrictions
You must have administrator privileges.
Example
To configure the switch contact to "
.
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s n m p s y s t e m _ c o n t a c t " M I S D e p a r t m e n t I I "
C o m m a n d : c o n f i g s n m p s y s t e m _ c o n t a c t " M I S D e p a r t m e n t I I "
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

7-8 enable rmon

Purpose
Used to enable RMON on the switch.
Format
enable rmon
Description
The enable rmon command enables RMON on the switch.
Parameters
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
A maximum of 255 characters is allowed. A null string is also
accepted.
M I S D e p a r t m e n t I I
":
87