Installation - HIKVISION DS-2CD883F-E Installation Manual

21
Installation Manual of Network Camera
Wiring Diagram
Figure 3-14

3.3.2 Installation

Ceiling mounting:
Note: If required, you can use a plier to remove the clip (one or two) on the side of the back box and
then route cables through the opening to secure the cables on the ceiling.
Clips
Remove the Clip
Figure 3-15
Steps:
1. Use the screws to fix the mounting base to the ceiling; rotate the back box counterclockwise to
secure it to the mounting base; use the lock screw to secure the dome camera.
Mount the Camera
Figure 3-16
2. Loosen the set screws with the hex key (supplied) to remove the lower dome.