[F] High-voltage transformer for the main
charger (PS-HVT-M)
(1) Remove the rear cover.
(2) Disconnect seven (7) connectors.
(3) Remove two screws.
(4) Remove two lock supports.
PS-HVT-M
[G] Size switch
(1) Pull out the cassette.
Screws
(2) Remove two screws.
(3) Disconnect one connector.
Note: The left screw is tightened with the protec-
tive cover on the corner of the switch.
Size switch
[H] Exit fan
Duct cover
(1) Remove the left-side cover (upper) (1 screw).
Exit fan
(2) Disconnect three connectors (front).
(3) Remove the duct cover (1 screw).
(4) Separate the exit fan from the cover (1 con-
nector).
1550/1560 GENERAL
2 - 23
Mar. 1998 © TOSHIBA