Notes: 1. Pay attention to the direction in which
the spring hanger on the front faces.
2. The charge wire should be placed se-
curely in the V-grooves on the front and
rear sides.
3. Don't allow the wire to kink.
4. Don't touch the wire with a bare hand.
Replacing the cleaning pad:
(1) Remove the charge wire.
(2) Remove the LED erasing array.
(3) Move the cleaning pad to the rear side.
(4) Remove the pad holder snap from the shaft.
Notes: 1. When reassembling, pay attention to
the direction of the pad holder in which
it faces.
2. When moved to the rear, the pads (2
pcs.) should be obviously away from the
wires.
Mar. 1998 © TOSHIBA
Spring hanger
[Rear side]
Pad holder
Shaft
Pad holder
[Rear side]
9 - 5
Terminal cover
Terminal base
1550/1560 DRUM