Cleaning Felt Roller And Cleaning Blade; Upper Heat Roller; Lower Heat Roller - Toshiba 1550 Service Manual

12.3.4

Cleaning felt roller and cleaning blade

(1) Remove the fuser unit.
(2) Remove the fuser guard.
Cleaning felt roller:
• Lifting the front side, take out the whole roller
unit upward (1f2).
Cleaning blade:
• Remove two screws to take out the roller.
12.3.5

Upper heat roller

(1) Take out the heater lamp.
(2) Remove the holder unit (2 screws).
(3) Remove the stop ring and bushing on the front
and then pull out the roller along with its gear
toward the rear.
Note: While replacing the roller, be careful not to
damage the roller surface with metal-plate
edges or be careful not to deform or dam-
age the separation claws.
12.3.6

Lower heat roller

(1) Remove the upper heat roller.
(2) Remove the separation-claw unit (1 screw).
Mar. 1998 © TOSHIBA
Cleaning felt roller
Stop ring and
bushing
12 - 5
2
1
Cleaning blade:
Holder unit
Gear
Upper heat roller
Separation claw unit
1550/1560 FUSER