9.3.4
LED erasing array
(1) Remove the main charger unit.
(2) Remove a connector.
(3) Remove a screw.
9.3.5
Main charger
(1) Remove the main charger unit.
Grid
•
Remove the grid by pulling it toward the rear.
Note: Be careful not to touch the shaded area with
a bare hand.
Charge wire
(Entire length: 353 mm; tungsten wire: 0.06 mm
dia.)
•
Remove the front and rear terminal covers.
•
Pinching the hook of the rear terminal cover
with cross pliers etc. will facilitate the removal.
1550/1560 DRUM
Charge wire
Spring
hanger
[Front side]
9 - 4
LED erasing array
Grid
Charge wire
[Rear side]
Mar. 1998 © TOSHIBA