13.4.3
Separation, pick-up and feed rollers
(1) Remove the cassette.
(2) Remove the paper guide.
Separation roller:
(1) It can be taken out if you pull it toward you.
Pick-up and feed rollers:
(1) Snap off the clips and slide out the pick-up roller
from its shaft. The feed roller can be removed
by the same procedure.
Note:
The separation, pick-up and feed rollers are the same parts as used in the copier.
Caution: During disassembly or reassembly, be careful not to lose the spring.
Mar. 1998 © TOSHIBA
Separation roller
Spring
Pick-up roller
13 - 11
Feed roller
Clip
1550/1560 OPTIONAL