Installing The Bluetooth Deskjet Printer; Connecting The Bluetooth Dongle Into The System - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
3-8-3

Installing the Bluetooth Deskjet Printer

1.) Power off/Shutdown the system as described in:
2.) Physically connect the Bluetooth dongle as described on Section
After boot up of the system, verify the correct connection of Bluetooth device driver on the maintenance
NOTICE
mode, see:
!! NOTICE:
Printer and connect the Bluetooth Printer Adapter"
printer.
3-8-3-1

Connecting the Bluetooth Dongle into the System

1.) Connect Bluetooth Dongle into the available USB port. There are three available USB ports on the
system. :
USB 2.0 port: Two hub ports for service and user
3 DRAFT (J
Section 3-8-3-2 "Verifying Bluetooth device driver"
Section 3-9-2 "External I/O Connectors"
Figure 3-19 External I/O Connectors - on Rear of System
Figure 3-20 External I/O Connector
Chapter 3 - Setup Instructions
25, 2014)
UNE
Section 3-7-3 on page
and, see:
for Bluetooth pairing between the system and
.
.
LOGIQ™ S7 E
XPERT
S M
ERVICE
3-25.
Section 3-8-3-1 on page
Section 3-8-3-3 "Prepare the
/P
RO
ANUAL
3-31.
3-31