Msg (Message) Key - Panasonic DBS 824 Manual

2.0 Features Update

MSG (Message) Key

44-Series phones only
CPC-S/M Version 2.0 and higher
Description
Programming
A-14
Ring Patterns Not Applicable to Analog Device. The following ring pattern
addresses will not affect the analog device:
Transfer Ring Pattern
SLT DISA Ring Pattern
Inbound Ring Pattern
Flash Interaction. Any disconnect signal sent to the analog port must be greater
than the SLT Flash Control; otherwise the disconnect signal will be interpreted as a
flash and the call will be placed on hold.
Programming Addresses That Affect the Analog Device. The following addresses
will control the analog device, but will not affect the digital key telephone:
SLT Disconnect Duration
SLT Flash Control
SLT Onhook Flash Timer
SLT Disconnect Signal
Analog Port on Large-Display Phone
Data Security on Analog Port
The MSG key on the VB-44225 Large-Display Phone adds the following
functionality to the phone:
• Auto-Callback. If a callback message has been left by another extension, you
can press the MSG key to place an automatic callback to the extension that sent
the message. If more than one callback message has been received, pressing the
MSG key will perform auto-callback in the order received.
• Auto-Answer Voice Message. You can press the MSG key to automatically
access your voice mailbox. The phone will dial your voice mailbox and send
access codes (if programmed) for retrieving new messages.
Auto-Callback is always enabled for large display phones. Use the following to
enable the MSG key for Auto-Answer Voice Message.
DBS 824-3.0/3.2-700
FF1 2# 1# 28# (0-6)#
FF1 2# 1# 30# (0 or 1)#
FF2 (Trunk)# 17# (0-9)#
FF1 2# 1# 31# (0-15)#
FF1 2# 1# 11# (0 or 1)#
FF1 3# 12# (0-6)#
FF3 (ExtPort)# 45# (0 or 1)#
FF3 (ExtPort)# 51# (0 or 1)#
FF3 (ExtPort)# 52# (0 or 1)#
Appendix A
Revised April 2000