NOTE:
A polyethylene bag available on the market can be
•
used. 0.04 mm or thicker one is recommended.
Too much dust will tear the bag easily, so do not
•
collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
Always make sure that the cleaner is switched off
•
and unplugged before emptying the polyethylene
bag. Failure to do so may cause an electric shock
and serious personal injury.
CAUTION:
Do not apply a great impact on the float cage and
•
tank. Applying a great impact may cause
deformation and damage to the parts.
Empty the tank at least once a day although this
•
depends on picked-up dust volume in the tank. Or,
the suction force will weaken and the motor may
be broken.
Do not grab the hook when emptying the tank.
•
Grabbing the hook may cause the hook to break.
Unhook and lift up the tank cover.
015544
Shake off the dust from the cloth filter / powder filter and
then take the polyethylene bag out of the tank.
NOTE:
Take the polyethylene bag carefully out of the tank
•
so that the polyethylene bag cannot be caught and
torn by the protrusion inside the tank when
emptying it.
Empty the polyethylene bag before it becomes full.
•
Too much dust in the tank may cause the
polyethylene bag to be torn.
Installing the tool box
015537
1.
Release the lock of the battery cover, and open
the battery cover.
2.
Set the rails on the tool box along the grooves on
the housing.
3.
Close the battery cover and apply the lock.
015538
The tool box is convenient for carrying batteries,
extension code, pipe, or cuffs.
Connecting the hose
CAUTION:
Never force the hose for bending or stamp it.
•
Never move the cleaner by a hose. Forcing,
stamping and pulling the hose may cause a
breakage or deformation of the hose.
When picking up large wastes such as planer
•
carvings, concrete dusts or similar other than
small wastes, use the 38 mm inner diameter hose
(optional accessory). Using the 28 mm inner
diameter hose (optional accessory) may cause a
hose stuffing and damage.
015541
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.
11