Purpose of this Document
This document is intended for the person installing and setting up the monitor and peripheral medical
devices for the Genesis Touch System. It does not contain instructions for scheduling or taking vital signs.
Unpacking Your Products
When you receive your Genesis Touch kit, carefully remove each piece of equipment from the box and
save any packaging materials in the event you need to return items. Your package may include different
products depending on the model and/or patient need. Assemble peripheral medical devices as necessary.
Refer to the manufacturer's instructions and safety documentation for more information.
Attach the included USB extender cable between the monitor and the adapter unit to power the Genesis
Touch from an outlet, as shown above. Alternatively, connect the USB cable to a USB slot on a computer.
Overview
Setting up generally consists of the following, depending on the patient's individual requirements:
•
Understanding the monitor
•
Setting up peripheral devices
•
Pairing and positioning the scale
•
Pairing a blood pressure unit
•
Pairing an oximeter
•
Configuring for manually-entered temperature readings
•
Un-pairing a peripheral device
Note:
Many features and functions of the tablet have been disabled to allow for use as a
Genesis Touch Monitor. Refer to the tablet manufacturer's instructions for additional
information.
Operating the Monitor
Place the monitor on the stand or on a flat, stable, and uncluttered surface where seating is available. A
location near a window on an outside wall usually works best for transmission purposes. The monitor can
be run on batteries, just as a cellular phone does, however, the preferred method is to keep it plugged in. To
charge the batteries, plug the monitor into an electrical outlet via the supplied AC power adapter.
IMPORTANT: We recommend that you have the monitor plugged in while using.
6/9/14
©
2014 Honeywell HomMed. All rights reserved.
Purpose of this Document
P4810EN.05
1