Entering A Meeting Identifier; Verifying One-Touch Video Setting - Honeywell Genesis Touch Getting Started

Hide thumbs Also See for Genesis Touch:

Table of Contents

Getting Started

Entering a Meeting Identifier

To set up the meeting identifier:

1. From the Video screen, select Meeting identifier for one-touch video visit. A screen similar to the

following appears:

If you are seeking optimum HIPAA compliance, it is recommended that a space is entered as the custom

meeting identifier so that a patient will be even more anonymous in a video visit.

2. Type the meeting identifier from your Fuze Meeting schedule and select OK. A screen similar to the

following appears showing the meeting identifier you entered:

Verifying One‐Touch Video Setting

To verify that you configured the monitor for one-touch video, from the Setting screen, select About. If

one-touch video is configured, a screen similar to the following appears with the meeting identifier for this

monitor of over 5 digits/numbers. Consult the Genesis Touch User Manual if you do not see this listed:

P4810EN.05

6/9/14

Table of Contents