Scheduling; Setting The Overall Schedule - Honeywell Genesis Touch Getting Started

Hide thumbs Also See for Genesis Touch:

Table of Contents

Scheduling

We recommend that care providers schedule vitals acquisition from LifeStream, however, schedules can

also be set from the monitor.

There are two steps to scheduling:

•

•

Setting the peripheral schedule.

You should first set up the patient's overall schedule of days and times for vital signs acquisition. Then, if

necessary, you can modify the schedule to set up specific days and/or times for each peripheral device or

manually entered reading, as needed. The process is the same for both, however, if you are setting up for

individual peripherals, you must be in the unique location for that peripheral.

Setting the Overall Schedule

You can set up to four individual scheduled reading times for a patient each day. The following example

shows how scheduling would be set up for the patient's overall schedule:

1. From the General Settings screen, select Schedule. The Schedule screen appears:

Note:

If readings are already scheduled, they will appear on this screen. To edit an existing reading,

select the reading. The reading is highlighted. Select the Schedule icon. The Edit Schedule

screen appears.

6/9/14

Scheduling

P4810EN.05

Table of Contents