Pairing a Blood Pressure Unit
If your kit includes a blood pressure unit, complete the following steps:
•
Insert four AA batteries and wait approximately two minutes or until you do not see "Pr" displayed on
the blood pressure unit screen if you are using the A&D Blood Pressure Unit, UA-767 PBT-Ci,.
•
Attach the blood pressure cuff to the blood pressure unit. Refer to the manufacturer's documentation
for instructions on how to operate it.
•
Follow these instructions to begin Bluetooth pairing with the monitor:
1. From the General Settings screen, select Peripherals. A Peripherals screen similar to the following
appears:
2. Select Blood Pressure:
3. The Blood Pressure screen appears:
6/9/14
©
2014 Honeywell HomMed. All rights reserved.
Pairing a Blood Pressure Unit
P4810EN.05
17