6. On the monitor, press Start Pairing. A Bluetooth Permission Request window appears:
7. Select Yes. Messages similar to the following appear:
8. To power the A&D scale, press the Measurement Switch button (blue/gray power button on the front
side of the A&D scale). The display window on the scale should zero.
9. Step on the scale.
10. Watch the messages on the screen. When the scale is paired, messages similar to the following appear
on the screen ending with "Pairing Succeeded!"
6/9/14
©
2014 Honeywell HomMed. All rights reserved.
Pairing an A&D Scale
P4810EN.05
15