Honeywell Genesis Touch Getting Started page 22

Hide thumbs Also See for Genesis Touch:

Table of Contents

Getting Started

4. Select Device. A screen similar to the following appears:

5. Select the No Device Paired check box. A screen similar to the following appears:

6. Put the blood pressure cuff on your arm.

7. On the Genesis Touch Blood Pressure screen, select Start Pairing. A message appears:

8. Press Yes. You will see messages similar to the following:

9. Now briefly press the START button on the blood pressure unit. Do not hold the button down. The

cuff inflates and messages appear on the Genesis Touch as your blood pressure reading is recorded.

Note:

A valid blood pressure reading will need to be established on the unit and the cuff may feel

tight on your arm. Follow the manufacturer instructions for taking a proper measurement.

P4810EN.05

6/9/14

Table of Contents