Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
2.
Do
not attempt t o use a step-up transformer, an engine generator or DC
3.
Do not allow anything to cover or clog the charger vents.
4. Do not short the battery cartridge.
A battery short can cause a large current
5. Do not store the tool and Battery Cartridge in locations where the tempera-
6.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
or ABOVE 40°C (104OF).
power receptacle.
flow, overheating, possible burns and even a breakdown.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode
in
a fire.
ADDITIONAL SAFETY RULES
FOR CORDLESS ANGLE DRILL
1. Be aware that this tool is always in an operating condition, because
it
does
2. Always be sure you have a firm footing.
3.
Hold the tool firmly.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
4. Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the plastic handle or plastic tool body to prevent electric
shock if you drill into a "live" wire.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7. Do not touch the drill bit or the workpiece immediately after operation, they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Advertisement
