Table of Contents
Advertisement
Quick Links
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
il tuo prodotto tra le
INSTRUCTION MANUAL
Angle Drill
DA3010 DA3010F
DA3011 DA3011F
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
migliori offerte di Elettroutensili
DOUBLE INSULATION
1
Makita DA3011FJ
o cerca
003794
Advertisement
Table of Contents
Related Manuals for Makita DA3011FJ
Summary of Contents for Makita DA3011FJ
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Makita DA3011FJ o cerca il tuo prodotto tra le migliori offerte di Elettroutensili INSTRUCTION MANUAL Angle Drill DA3010 DA3010F DA3011 DA3011F 003794 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using.
-
Page 2: Specifications
EC Declaration of Conformity and can, therefore, also be used from sockets without earth wire. Makita Corporation responsible ENG102-3 manufacturer declare that the following Makita Noise machine(s): The typical A-weighted noise level determined according Designation of Machine: to EN60745: Angle Drill... - Page 3 Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock.
-
Page 4: Drill Safety Warnings
Power tool use and care the operator an electric shock. 18. Do not force the power tool. Use the correct Always be sure you have a firm footing. power tool for your application. The correct Be sure no one is below when using the tool in power tool will do the job better and safer at the high locations. - Page 5 Reversing switch action Installing side grip (handle) 1. Reversing switch lever 003796 003797 CAUTION: CAUTION: Always check the rotational direction before Always be sure that the side grip is installed • • operation. securely before operation. Use the reversing switch only after the tool comes Screw the side grip on the tool securely.
-
Page 6: Operation
If you need any assistance for more details regarding the point to be drilled. Place the point of the bit in the these accessories, ask your local Makita Service Center. indentation and start drilling. Drill bits •... - Page 8 Makita Corporation Anjo, Aichi, Japan 884467G224...