Table of Contents
Advertisement
Workpiece
shape
Cutting
angle
90°
45°
Workpiece
shape
Cutting
angle
102 mm × 194 mm
90°
70 mm × 233 mm
45°
115 mm × 103 mm
003991
Carrying tool
003992
Fold down the tool head to the position where you can
attach the chain to the hook on the handle.
115 mm
119 mm
115 mm
106 mm
137 mm
100 mm
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
2
003993
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
7
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap
Advertisement
Table of Contents
