Makita BHP460 Instruction Manual page 20

1 NAME PLATE BHP4EO
2 HOUSING BUMPER SET
3 HOUSINGSET
4
5
SPEED CHANGE LEVER ASS'Y
E F/R CHANGE LEVER
7
SWITCH
8
BITHOLDER
9 SUPPORT PLATE
10
TERMINAL
1 1
12 KEYLESS DRILL CHUCK
13
13
GEARASS'Y
14 TAPPING SCREW 4x25
15
TAPPING SCREW ST 4x8
16 DCMOTOR
17 PAN HEAD SCREW M3X8
18
CARBON BRUSH CB-430
19
HOLDERCAP
20 HOUSING SET
21 HOUSING BUMPER SET
22 MAKITA LABEL
TAPPING SCREW BIND PT 3x1 6
-
FLAT HEAD SCREW MBX32
1
1
1
8
1
1
I
2
1
1
1
1
1
4
3
1
I
1
2
1
1
1
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the peripd of ONE YEAR from the date of
original purchase. Should any trouble develop during this one-year period, return the COMPLETE
tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows
the trouble is caused by defective workmanship or material, Makita will repair (or at our option,
replace) without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
repairs are required because of normal wear and tear:
The tool has been abused, misused or improperly maintained;
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE bOR ANY INDIRECT, INCIDENTAL OR CON-
SEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER
APPLIES BOTH DURING AND AFTER THE TERM 01 THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES O F "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE,"
AFTER THE ONE-YEAR TERM O F THIS WARRANTY.
This Warranty gives you specific legal rights, and you may also have other nghts which vary from
state to state. Some states do not allow the exclusion or limitation o f incidental or consequential
damages,
so
the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
-
Makita Corporation
3-11
-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
884324-062
PRINTED IN JAPAN
2MWl-5N