Makita CL072D Instruction Manual page 9

NOTE:
Dust pack is a throw-away type.
•
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge filter
1. Sponge filter
011534
To remove the sponge filter, remove the dust bag or dust
pack and then pinch and take it out.
Symptom
Weak suction power
Not working
011566
NOTE:
Do not attempt to repair cleaner by yourself.
•
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita cleaner
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Extension wand (Straight pipe)
•
Nozzle
•
1
Area to be investigated
Is dust bag or paper pack full of dust ?
Is dust bag clogged ?
Is paper pack clogged ?
Is battery cartridge exhausted ?
Is battery cartridge exhausted ?
or attachments
Only use accessory or
1. Recessed wall
011535
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/dust pack mounting area.
CAUTION:
After cleaning sponge filter, be sure to install it on
•
the cleaner. If washed in water, dry it up before
installing. An insufficiently dried sponge filter may
shorten the service life of the motor.
Things to Check Before Asking for Repairs
Nozzle for carpet
•
Shelf brush
•
Corner nozzle
•
Round brush
•
Flexible hose
•
Paper pack
•
Various type of Makita genuine batteries and
•
chargers
are
9
1
Fixing method
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery cartridge.
Charge the battery cartridge.