Do not short the battery cartridge. • See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance. SPECIFICATIONS Model: CL001G Capacity 730 mL Continuous use (with battery BL4025) 1 (Quiet mode) Approx. 80 min 2 (Normal speed mode) Approx.
Use only the charger supplied by the manufac- Symbols turer to recharge. 12. Do not pick up anything that is burning or The followings show the symbols which may be used smoking, such as cigarettes, matches, or hot for the equipment. Be sure that you understand their ashes.
Page 10
Do not expose battery cartridge to water also void the Makita warranty for the Makita tool and or rain. charger. A battery short can cause a large current...
Indicating the remaining battery FUNCTIONAL capacity DESCRIPTION Press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps CAUTION: Always be sure that the tool is light up for a few seconds. switched off and the battery cartridge is removed ► Fig.3: 1.
Lighting up the lamp Disposing of dust CAUTION: CAUTION: Do not look in the light or see the Empty the cleaner before it source of light directly. becomes too full, or the suction force weakens. CAUTION: Be sure to empty the inside of the To turn on the lamp, push the suction power change cleaner itself of dust.
When using attachment without lock Installing or removing stay / HEPA filter function Optional accessory CAUTION: To connect attachment without For the stay and sponge filter lock function, twist and insert it in direction of the arrow to secure the connection during use. To remove the stay, push up the bottom part of pillars To disconnect the attachment, twist and extract of the stay with your fingers and release its groove from...
Clean out the filter from time to time. To maintain product SAFETY and RELIABILITY, Occasionally wash the HEPA filter in water, rinse and repairs, any other maintenance or adjustment should dry thoroughly in the shade before use. Never wash the be performed by Makita Authorized or Factory Service filter in a washing machine. Centers, always using Makita replacement parts. ► Fig.33 After use Sponge filter...
About the cyclone attachment CAUTION: These accessories or attachments are recommended for use with your Makita tool Using the cleaner with the cyclone attachment installed specified in this manual. The use of any other reduces the amount of dust that enters the capsule,...
Page 16
Disposing of dust When dust has accumulated up to the full line of the dust case, follow the procedure below and dispose of the dust. Hold the dust case firmly, press and hold the two buttons, and remove the dust case. ► Fig.37: 1. Full line 2. Dust case 3. Button (two locations) 4. Mesh filter Dispose of the dust inside the dust case and remove any dust and powder adhered to the surface of...