Samsung DCS Technical Manual page 91

SAMSUNG DCS
TECHNICAL MANUAL
MMC 319:
Applies to all software versions of the DCS 70, DCS 24 and to DCS Version 6 software.
Description:
Assigns stations to specific branch groups. If a call is presented at a station which a member of branch group
01 other members of branch group 01 can answer that call by going off hook.
It is advisable that members of branch groups utilise the 'Hot Keypad' feature for originating calls as going
off-hook could answer calls ringing a other members of specific branch groups.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 319
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press right
soft key to move cursor
3. Enter branch group number 01-20
This will return the cursor to step 1
5. Press TRSF to store and exit
OR
Press SPK to save and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: NONE
Page 91 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
ALL STATIONS ARE UNASSIGNED
Assign Branch Group
DISPLAY
[201] BRANCH GROUP
BRANCH GRP: NONE
[205] BRANCH GROUP
BRANCH GRP: NONE
[205] BRANCH GROUP
BRANCH GRP: 01
PROGRAMMING
SECTION
May 2002