Samsung DCS Technical Manual page 80

SAMSUNG DCS
TECHNICAL MANUAL
MMC 311:
DESCRIPTION:
Assigns and sets parameters for the serial interface module (SIM).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 311
Display shows
2. Enter station number of SIM (eg., 257)
from dial key pad
Press UP or DOWN key to make selection
and
press RIGHT soft key to move cursor
3a. Enter desired selection from table "A:
(eg., 01)
Press UP or DOWN key to make selection
And press RIGHT soft key to move cursor
3b. Enter desired selection from table "D"
(eg., 02)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3c. Enter desired selection from table "E"
(eg., 03)
Press UP or DOWN key to make selection
And press RIGHT soft key to move cursor to
step 4
Page 80 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
OR
Assign SIM Parameter
DISPLAY
[256] SIM PARA.
SIM TYPE
[257] SIM PARA.
SIM TYPE
[257] SIM PARA.
CALL MODE
[257] SIM PARA.
ANS MODE
[257] SIM PARA.
AUTO BAUD
PROGRAMMING
SECTION
:DTE
:DTE
: MANUAL
: MANUAL
: ON
May 2002