Samsung DCS Technical Manual page 147

SAMSUNG DCS
TECHNICAL MANUAL
MMC 507:
DESCRIPTION:
Enters the system into night mode automatically by utilising time and day tables. A NIGHT key is not
needed as the system will switch automatically, it is helpful to have a dedicated button so the status can be
manually changed. The start time is the time the system will switch from day to night service on the day being
programmed. The end time is the time the system changes from Night Service to Day Service on the day
being programmed.
FEATURE KEYS
0 SUN
1 MON
2 TUE
3 WED
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 507
Display shows
2. Dial day number (0-6 eg., 3)
OR
Press UP or DOWN key to select day and
press RIGHT soft key to advance cursor
to step 3
3. Dial in start time for night (1730)
If time entered is valid, cursor moves to end time
Enter end time If time entered is valid, system
returns to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS:
(Note this MMC updated 5
Page 147 of 287 Updated I&M
4
5
6
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
START 0000
END 0000
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
th
October 1999 – start and end time explanations corrected)
Assign Auto Night Time
THU
FRI
SAT
DISPLAY
NIGHT TIME
ST : _
NIGHT TIME
ST : _
NIGHT TIME
ST : 1730
PROGRAMMING
SECTION
(SUN)
END :
(WED)
END :
(WED)
END : 0800
May 2002