Samsung DCS Technical Manual page 88

SAMSUNG DCS
TECHNICAL MANUAL
MMC 316:
Applies to all software versions of the DCS 70, DCS 24 and to DCS Version 6 software. Not for DX408.
DESCRIPTION:
Copy the condition of station/trunk usability and station/station usability from one station to another station.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 316
Display shows
2. Enter destination station number (e.g. 205)
OR
Press UP or DOWN key to make selection and press RIGHT
soft key to move cursor
3. Enter the source station number (e.g. 210)
OR
Press UP or DOWN key to make selection and press RIGHT
soft key to move cursor
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS:
Page 88 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 304 Assign Station/Trunk Use
MMC 317 Assign Station/Station Use
Copy Station Usable
DISPLAY
[201] CPY USABLE
FROM:NONE
[205] CPY USABLE
FROM:NONE
[205] CPY USABLE
FROM:210
PROGRAMMING
SECTION
May 2002