Samsung DCS Technical Manual page 108

SAMSUNG DCS
TECHNICAL MANUAL
MMC 411:
DESCRIPTION: NOT USED IN AUSTRALIA
Defines the type of signalling for the E1 trunks assigned to the card.
There are four (4) types of signalling as detailed below. There are six conditions of signalling associated with
E&M and DID.
MODE TYPE
0 LOOP
1 AC15
2 DID
3 UNUSE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 411
Display shows
2a. Enter desired trunk number (eg., 704)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
Press ANS/RLS to select all trunks
2b. Enter desired trunk type selection from
above list
Press UP or DOWN key to make selection
and press RIGHT soft key to
return to step 2a
In case of DID or AC15 press
RIGHT soft key
to advance to type of trunk (eg., WINK)
and press RIGHT soft key to
return to step 2a
Page 108 of 287 Updated I&M
IMMEDIATE
IMMEDIATE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
OR
OR
OR
OR
OR
Assign E1 Signal Type
CONDITIONS
DELAYED WINK
DELAYED WINK
DISPLAY
[701] E1
UNUSE
[704] E1
UNUSE
[704] E1
LOOP
[704] E1
DID : WINK
PROGRAMMING
SECTION
SIGNAL
SIGNAL
SIGNAL
SIGNAL
May 2002