Makita 9556HN Technical Information page 6

W
iring diagram
[4] Connecting Lead wires
[4]-1. Switch
Connect Lead wires with Switch as drawn in Fig. D-2.
Fig. D-2
[When Spacer is used]
Power supply cord
Switch button
Switch
[4] -2. Rear end of Field and Motor housing
Route Field lead wires as drawn in Figs. D-3 - D-6.
Fig. D-3
[Lead Wires of Field]
Lead wires (black)
Field
Lead wires (white)
Spacer
Earth terminal on the lead wire (clear)
of Noise suppressor* has to be connected
to this portion.
Switch lever
Lead wire (black)
Connect to Brush holder B.
[When Spacer is not used]
[Motor housing with Field]
(view from Rear cover side)
Brush holder A
Brush holder B
Spindle
*Noise suppressor is not used for some countries.
P 6/ 8
Connect to Brush holder A.
Lead wire
(black)
Lead wire (white)
Connect to Switch
terminals.