Before First Use - Breville wake cup vcf042 Instructions For Use Manual

Before First Use

Before using your Wake Cup for the first time
Always position your Wake Cup in such a way that any splashing during the
dispensing cycle will not cause damage to the surrounding areas. Your Wake
Cup will become hot during use. Always use care when handling your Wake
Cup.
Remove your Wake Cup carefully from the box. Remove any packaging and promotional
material and position your Wake Cup on a dry, level, secure surface away from the edge.
Remove the water jug and wash it in warm soapy water. Rinse and dry thoroughly.
1. Remove the water jug and fill it with cold water to the 2 CUPS MAX mark.
2. Remove the water tank cap by giving it a quarter turn anticlockwise.
3. Carefully pour the water from the water jug into the water tank. Refit the water
tank cap by giving it a quarter turn clockwise. Make sure that the water tank
cap is correctly and securely fitted. Connect your Wake Cup to a mains supply
socket. Your Wake Cup will sound two beeps. At this stage, it isn't neccessary to set
the clock to the current time.
4. Place two suitable cups (not supplied) below the dispensing nozzles making sure
that each cup is positioned directly below a dispensing nozzle. Make sure that the
two cups are capable of holding all of the water used at step 1.
5. Press and hold the dispensing button until it turns red. Your Wake Cup will start to
boil the water.
6. When the water reaches boiling point, it will be dispensed into the cups below the
dispensing nozzles. Carefully discard this water.
Allow your Wake Cup to cool for a few minutes then repeat the above procedure once
more. This will remove any residues left over from the manufacturing process.
Wash your vacuum flask with warm soapy water and rinse thoroughly before use.
6