3G Broadband Wireless Router MBR624GU User Manual
3. For the non-WPS devices that you want to connect, open the networking utility and follow the
utility's instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/
PSK + WPA2/PSK security method, and passphrase).
4. For the WPS devices that you want to connect, follow the procedure
Add a WPS Client" on page 2-14
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the router.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the WPS Settings
screen.
5. To view a list of all devices connected to your router (including wireless and Ethernet-
connected), see
"Viewing Attached Devices" on page
2-18
or
"Using PIN Entry to Add a WPS Client" on page
4-8.
v1.0, January 2009
"Using a WPS Button to
Wireless Network Configuration
2-15.