NETGEAR MBR624GU User Manual page 37

2. From the main menu, select Wireless Settings, and then click Setup Access List to display the
Wireless Station Access List screen.
Figure 2-4
The trusted wireless stations listed on this screen are the wireless clients that will have access
to the wireless network when the list is enabled.
3. Adjust the list as needed for your network. You can add devices to the Trusted Wireless
Stations list using either of the following methods:
• If the computer is in the Available Wireless Stations table, select the radio button of that
computer to capture its MAC address.
• Use the Add New Station Manually fields to enter the MAC address of the device to be
added. The MAC address can usually be found on the bottom of the wireless device.
Note: If no device name appears when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.
4. Click Add, and then click Apply to save these settings. Now, only devices on this list will be
allowed to wirelessly connect to the Product Family.
Wireless Network Configuration
3G Broadband Wireless Router MBR624GU User Manual
v1.0, January 2009
2-9