Using The Setup Wizard; Using The Setup Wizard To Configure Your Router's Internet Connection - NETGEAR MBR624GU User Manual

3G Broadband Wireless Router MBR624GU User Manual
3. Verify that the following LEDs on the front of the router light up:
• Power. Power is supplied to the router.
• LAN. Your computer is securely connected to this LAN port on the router.
• USB. Your wireless USB modem is securely connected to the router.
• Wireless. There is a wireless signal from the router.
• Internet. This LED is red because the router is not connected to the Internet.

Using the Setup Wizard

The NETGEAR Setup Wizard helps you to configure your Internet connection and wireless
network. The Setup Wizard guides you through the setup process. You can also manually
configure your router (see
Using the Setup Wizard to Configure Your Router's Internet
Connection
1. From the Ethernet connected computer, open a Web browser.
2. Connect to the router by typing http://192.168.0.1 or www.routerlogin.com in the address
field of your browser. The Setup screen displays:
Figure 1-8
Note: If you connect to the router after initial configuration, a log in prompt displays.
See
1-8
"Accessing the Setup Wizard after Installation" on page
"Logging in to the Router after Installation" on page
v1.0, January 2009
1-11).
1-10".
Installing Your Router