NETGEAR MBR624GU User Manual page 33

The settings for this screen are explained in
3. Select the region in which the router will operate.
4. For initial configuration and test, leave the other settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and wireless security
settings as your router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the router. If there is interference, adjust the channel.
Table 2-1. Wireless Settings
Settings
Wireless Name (SSID)
Network
Region
Channel
Mode
Wireless Network Configuration
3G Broadband Wireless Router MBR624GU User Manual
Table 2-1.
Description
The SSID is also known as the wireless network name.
Enter a 32-character (maximum) name in this field. This
field is case-sensitive.
In a setting where there is more than one wireless network,
different wireless network names provide a means for
separating the traffic. Any device you want to participate in a
wireless network must use the SSID.
The location where the Product Family is used.
The wireless channel used by the gateway. The default is
Channel 6.
Do not change the wireless channel unless you experience
interference (shown by lost connections or slow data
transfers). If this happens, you might need to experiment
with different channels to see which is the best.
The default is g & b, which allows both 802.11g and 802.11b
wireless stations access. Note that in b only mode, 802.11g
wireless stations can connect if they can operate in 802.11b
mode.
v1.0, January 2009
2-5