Advanced Wireless Settings - NETGEAR MBR624GU User Manual

3G Broadband Wireless Router MBR624GU User Manual
To configure WPA or WPA2 in the router:
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default user name
of admin and default password of password, or using whatever user name, password, and
LAN address you have chosen for the router.
2. Select Wireless Settings from the main menu.
3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
4. The settings displayed on the screen depend on which security option you select.
5. For WPA-PSK or WPA2-PSK, enter the passphrase.
6. If prompted, enter the settings for the Radius server. For WPA-802.1x or WPA2-802.1x, these
settings are required for communication with the primary Radius server.
• Primary Radius Server IP Address. The IP address of the Radius server. The default is
0.0.0.0
• Radius Port. Port number of the Radius server. The default is 1812.
• Shared Key. This is shared between the wireless access point and the Radius server
during authentication.
7. To save your settings, click Apply.

Advanced Wireless Settings

The Advanced Wireless Settings screen includes settings for Push 'N' Connect (WPS) and for
wireless distribution system (WDS) setup. From the main menu, select Advanced Wireless
Settings to display the following screen:
Figure 2-6
2-12
v1.0, January 2009
Wireless Network Configuration