Makita BGA402 Instruction Manual page 9

• Abrasive discs
• Lock nut (For abrasive disc)
• Lock nut wrench
• Wire cup brush
• Wire bevel brush 85
• Side grip
• Dust collecting wheel guard
• Diamond wheel
• Various type of Makita genuine batteries and chargers
For Model BGA450
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
For Model BGA452
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Angle Grinder
Model No./ Type: BGA450, BGA452
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
ENG104-2
): 74 dB (A)
pA
ENG208-4
2
): 8.5 m/s
h,AG
2
ENG312-1
2
): 2.5 m/s or less
h,SG
2
ENG104-2
): 73 dB (A)
pA
ENG208-4
2
): 8.5 m/s
h,AG
2
ENH101-13
Makita International Europe Ltd.,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
9