Makita BGA450 Instruction Manual
Cordless angle grinder
Hide thumbs
Also See for BGA450:
- Instruction manual (37 pages) ,
- Instruction manuals (80 pages) ,
- Instruction manual (12 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BGA450
Summary of Contents for Makita BGA450
- Page 1 Cordless Angle Grinder MODEL BGA450 MODEL BGA452 007214 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
Intended use MAKITA INTERNATIONAL EUROPE LTD. The tool is intended for grinding, sanding and cutting of Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 metal and stone materials without the use of water. 8JD, ENGLAND Responsible manufacturer: Makita Corporation Anjo Aichi Japan... -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA002-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 4: Additional Safety Rules
19. Store idle power tools out of the reach of chil- ENB099-1 dren and do not allow persons unfamiliar with the power tool or these instructions to operate ADDITIONAL SAFETY RULES the power tool. Power tools are dangerous in the hands of untrained users. -
Page 5: Important Safety Instructions
20. Do not use the tool on any materials containing Always stop tool operation and charge the bat- asbestos. tery cartridge when you notice less tool power. 21. Do not use water or grinding lubricant. Never recharge a fully charged battery car- tridge. -
Page 6: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 007215 • Always switch off the tool before insertion or removal of the battery cartridge. - Page 7 Indication lamp with multi function 007224 Indication lamps are located in two positions. When the battery cartridge is inserted on the tool with the slide switch posi- tioned in the “O (OFF)” position, the indication lamp flickers quickly for approx- imately one second.
- Page 8 Installing or removing depressed center grinding wheel/Multi- 007219 disc WARNING: • Always use supplied guard when depressed center grinding wheel/Multi- disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. Mount the inner flange onto the spindle. Fit the wheel/disc on the inner flange and screw the lock nut onto the spindle.
-
Page 9: Operation
OPERATION WARNING: • It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. • ALWAYS replace wheel if tool is dropped while grinding. • NEVER bang or hit grinding disc or wheel onto work. -
Page 10: Maintenance
Reinstall the holder cap cover on the tool. To maintain product SAFETY and RELIABILITY, repairs, any other mainte- nance or adjustment should be performed by Makita Authorized Service Cent- ers, always using Makita replacement parts. 1. Brush holder cap... - Page 11 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 12 Makita Corporation Anjo, Aichi, Japan 884662A226...