Specifications; Specific Safety Rules - Makita BDF343 Instruction Manual

ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model BDF343
Noise
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
The noise level under working may exceed 85 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
For Model BDF453
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Explanation of general view
3-1. Reversing switch lever
4-1. Speed change lever
5-1. Adjusting ring
5-2. Graduation
Model
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
) : 72 dB(A)
pA
BDF343
10 mm
25 mm
5.1 x 63 mm
192 mm
1.3 kg (BL1415) / 1.5 Kg (BL1430)
D.C. 14.4 V
ENE034-1
Vibration
The vibration
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
ENG103-1
EC-DECLARATION OF CONFORMITY
Model; BDF343,BDF453
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC.
ENG202-1
sum) 000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
ENG101-1
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
3
5-3. Pointer
6-1. Sleeve
6 mm
0 - 1,300
0 - 400
1.6 kg (BL1815) / 1.8 Kg (BL1830)
total value (tri-axial
) : 2.5 m/s
h,D
EN55014 in accordance
CE2007
Tomoyasu Kato
Director
BDF453
13 mm
36 mm
6 mm x 75 mm
214 mm
D.C. 18 V
ENG202-1
vector sum)
2
or less
ENH102-7
with Council
GEB002-2