Connecting A Sip Trunk - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL
ORDERING A PRI
The following information may be useful when ordering PRI service from the telephone
company.
PARAMETERS supported on OfficeServ TEPRI cards used for PRI service only.
FRAMING
Extended Super Frame (ESF 64K Frame)
CODING
B8ZS - ESF 64k Coding
MMC 808 is not available since T1 mode is not supported on this product.
E1/PRI Port
Pin No. 1
PRI Rx+
Function
E1
Function

6.2.3 Connecting a SIP Trunk

There is no physical SIP trunk card required to use the SIP trunking service. However, in order
to use the SIP trunking service, the OfficeServ system must be IP-enabled. That means that
the OfficeServ system must have an MGI card with the latest MP20S software and have high
speed Internet connection.
Please refer to the "OfficeServ Series SIP Trunking Quick Reference Document" for
configuration.
PRI Port
(RJ-45)
2 3 4
Rx- - Tx+
NOT SUPPORTED IN USA
Figure 6.2 RJ-45 Port of TEPRI/TEPRIa Board
6.3
PART 6 MAY 2010
PRI Circuit
Yes
PRI Circuit
Yes
5 6 7
Tx- - -
Home Page
INSTALLATION
8
-