System Data/Activity Reports; Officeserv 7200-S And Analog Terminal Adapters (Atas) - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL

7.2.7 SYSTEM DATA/ACTIVITY REPORTS

The following type of reports can be output to a PC or LAN printer that is connected to the
same network as the MP20S: SMDR (Station Message Detail Records), UCD Reports, Traffic
Reports, Alarm Reports and much more.
data output network configuration
can also configure the reports to be sent to PCs running 3
Reporting Packages, etc.).

7.2.8 OfficeServ 7200-S and ANALOG TERMINAL ADAPTERS (ATAs)

The OfficeServ 7200-S can be SIP enabled (SIP licenses required) to interface with other 3
party analog terminal adapters (ATA) devices, to provide voice connectivity to a VoIP network.
The SIP enabled adapters can be used to support specialized voice applications such as:
• VoIP connectivity to remote analog stations.
• VoIP connectivity to remote Fax Machines.
• 911 routing to remote SIP-PSTN Gateway.
These 3 party analog terminal adapters (ATA) are not available through Samsung, and must
rd
be purchase separately.
of the manual.
Refer to MMC 829
(See OfficeServ 7200-S Programming Manual).
MP20S
OfficeServ 7200
Figure 7.45 Connecting SMDR and Printer
For more details, please refer to the special application section 2.15
7.47
to configure the report type and
party applications (i.e. SMDR
rd
LAN
SMDR
Home Page
INSTALLATION
PART 7 MAY 2010
This MMC
LAN
PRINTER
rd