Program Trunk Names - Samsung iDCS100 System Administration Manual

Samsung iDCS100

PROGRAM TRUNK NAMES

[MMC 404]
This program is used to set or replace a name or identification for each C.O. line, up to
11 characters long.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 404
Display shows
2. Dial trunk (e.g., 704) OR press the VOLUME
keys to select trunk and press the right soft
key to move the cursor
3. Enter the trunk name using the procedure
described in Program Station Names
and press the right soft key to return to step 2
4. Press Transfer (or TRSF) to store and exit
programming OR press SPEAKER to store and
advance to the next program
System Administration Guide
DISPLAY
[701] T R U N K N A M E
[704] T R U N K N A M E
_
[704] T R U N K N A M E
SAMSUNG
15